Insights
Cabling, build-outs and office moves without downtime
Cat6 versus Cat6a versus fiber, what structured cabling costs in Dallas, racks and patch panels, Wi-Fi access points, and how to move an office over a weekend so Monday morning works. Written from jobs done in real Dallas–Fort Worth buildings.
Results
Office move IT checklist for Dallas businesses
The IT side of an office move, laid out by timeline: what to order eight weeks out, what to label four weeks out, what to test the week before, and what to check on the first Monday.
What does structured cabling cost for a Dallas office?
Cabling is priced per drop, and the drop count, the ceiling, the distance to the IT room and the building rules move the number more than the cable itself. Here is how to read a quote and get an accurate one.
Cabling and IT support from one company: why it matters for a build-out
Most offices get their cable from one company and their network from another, and the seam between them is where problems hide. Here is what changes when the same company does both, and how a build-out runs that way.
Cat6 vs Cat6a vs fiber for an office build-out
Most offices need Cat6 to the desks, Cat6a in a few specific places, and fiber only for backbone runs. Here is how I decide, what drives the cost, and what to ask an installer.
Data cabling for dental, medical and law office build-outs in Dallas
A dental operatory, an exam room and an attorney's office each need a different cable plan. Here is how I lay out drops, imaging, phones and the IT room for clinical and legal build-outs in Dallas, and how a dental office relocation runs.
Getting internet into a new office: who coordinates it and when
Internet is the slowest item in any new office and the one nobody owns. Here is who should coordinate it, what the lead times look like, how fiber, cable and fixed wireless compare, and the order list for the week you sign.
How much does it cost to move office IT in Dallas?
The honest answer is that it depends on desks, drops, servers and how much of the old office is worth moving. Here is what drives the number, with typical market ranges, and how I quote it.
Low-voltage contractor or IT company: who should run your cable?
Both a low-voltage contractor and an IT company can run Cat6 in a Dallas office. The difference is where their work stops. Here is who does what, and which to hire for your situation.
Moving office IT over a weekend without losing a business day
Shut down Friday at five, work normally Monday at eight. Here is what has to be true before the weekend, how the two days run, and the honest cases where one weekend is not enough.
Office IT decommissioning: closing the old office properly
Leaving an office is more than turning off the lights. Drives must be wiped, equipment disposed of properly, the suite handed back in the state the lease requires, and every service canceled in writing. Here is the list, and how it pairs with setting up the new site.
Office Wi-Fi access point installation: cabling, placement and setup
Good office Wi-Fi is a cabling job first and a radio job second. Here is how I decide how many access points an office needs, where they mount, and what a proper installation includes.
Opening a second office: how the IT gets set up
A second office is not a copy of the first. Here is what the new location needs, how the two sites share files, sign-in and phones, what to order the day you sign the lease, and how one owner-led company supports both.
Have a question these did not answer?
Ask me directly. If it is a good question I will probably write the article.